Skip to main content

The New Duo Cartridge PCB allows you to use two 8k (2764 or 27C64) EPROMS and switch between them. This means you can have your two favourite commodore 64 cartridges on one board, this is great for lots of applications apart from just having your two favourite games at hand, two test/diagnostic packages, basically anything you need to hand - plus you can switch the PCB off without having to unplug and there's a handy reset button.

These cartridge PCBs have been designed to hold two 28 pin 2764 or 27c64 (series) EPROMs. The board maps 8k of ROM at $8000-$9FFF and connects to the Commodore 64 cartridge port. Switch to select socket 1 or 2, board on/off switch and a reset button.

Comments

Post a Comment

Popular posts from this blog

LumaFix 64 has arrived!

LumaFix64 has arrived


LumaFix was made to easily remove vertical lines from your C64 image caused by signals also in the VIC-II video chip. It also has an adjustment for the Chroma signal that can help reduce problems related mostly to s-video connection on modern TV:s, the dreaded chequered pattern. LumaFix64 helps getting rid of the problem by inverting the interfering signals and feeding it back into the Luma signal.

We will make up a couple of test units and send them over to the developer e5frog and as soon as we get the OK we will sell them!

SD2IEC Now available at Shareware Plus for the Commodore 64

The SD2IEC market is flooded with budget, poor quality SD2IEC Interfaces, often just the pcb with no protection and those which are cased are clumsy and difficult to use on a day by day basis.

In partnership with the designers & manufacturers of the uCassette and Tapuino v2, we have now received our first delivery of SD2IEC Interfaces.

Features - Retro design, Attend SD card socket, Adjustable device number by dip switch (8,9,10,11), User port power supply, Actual firmware, upgradeable via sd card, LEDs (Blue, Red) on Commodore logo, 4 buttons: User port reset, SD2IEC reset and disk change buttons, Atmega 1284p microcontroller.

The package includes: SD2IEC Drive & 60cm Data cable, User Guide on pdf format. 100% tested and working.



Take a look at the picture, these plug into the Commodore's User Port and sit neatly at the side of your 64.








Some extra pictures showing the controls and cable.

Commodore 64 WiFi Modem now finished plus bonus BBS Cards!

We have been working overtime to get the WiFi Modems packaging finished and it looks fantastic!




The WiFi 64 is £34 plus postage. UK Postage is £2.50 and overseas £6.50, if you would like tracking then postage is £12.50, sorry we do not post to Hungary or Canada. Simple email sales@sharewareplus.com

Plus the new Top BBS Cards are finished to go with the modems!


We have about 40 spare packs, would you like a pack? Email us, pay £2 and the postage and we will get a pack on the way to you!