Skip to main content

OVP 64 - Over Voltage Protector 64 now on sale


The first batch of OVP 64 are now on sale for just £14.95 plus postage.

Comments

  1. Hi! How can we purchase? Thanks !

    ReplyDelete
  2. Any plans for a C128 version? As running one and worry about over taxing it with the SD2IEC, port expanders, etc..

    Just ordered this on ebay as my 1541 UltimateII+ should be on the way this week for my general use C64. If it is as good as I think it is, I will try to get 2 more for my cynthCART 2/SIDcartII and MSSIAH setups on my other 2 C64s. C64 are pretty cheap but the addon I want to protect.

    ReplyDelete
  3. The OVP 64 is a work in progress, we made lots of revisions before we got one that we were happy to sell, and we are now on a new design, the RED version and soon we will have a cased one. As for the 128 we have only been able to source a few of the square din sockets and plugs, but they are very expensive, so its unlikely we will be able to get enough to make a OVP 128.

    ReplyDelete

Post a Comment

Popular posts from this blog

LumaFix 128 has now entered mass assembly

I am pleased to confirm the new LumaFix 128 developed by e5frog has now finished testing and has now entered production and will be available during December.

e5frog designed LumaFix 64 and has a proven track record in the Commodore community.

Here are some pictures for you to enjoy. These are pre production versions -











These are now being manufactured and will be on sale shortly.

The Final Cartridge III++ For the Commodore 64

Commodore 64 The Final Cartridge III+ Loaded with Utilities & Applications!

Redesigned by efrog5 & his team, The Final Cartridge III+ adds over 60 new functions to your Commodore 64, and comes with a graphical interface with fast load and save.

It's supplied ready to go - The cartridge featured a "reset" button and a "freeze" button, as well as a LED that indicated whether or not the module was active. The cartridge featured a "Final Kill" option (accessible through the desktop, freezer or BASIC) which disabled the cartridge's functionality and booted the computer to unexpanded state. This was needed as some software, particularly games, were incompatible with fast-loaders; disabling the cartridge meant it never needed to be removed!

The FC3+ can be combined with an SD2IEC Floppy, the Fast loader stays alive in File-Browsers like CBM or SD2BRWSE. Also, user have the very good FC3 F-key commands for changing directories on the SD-Card or l…

SD2IEC Now available at Shareware Plus for the Commodore 64

The SD2IEC market is flooded with budget, poor quality SD2IEC Interfaces, often just the pcb with no protection and those which are cased are clumsy and difficult to use on a day by day basis.

In partnership with the designers & manufacturers of the uCassette and Tapuino v2, we have now received our first delivery of SD2IEC Interfaces.

Features - Retro design, Attend SD card socket, Adjustable device number by dip switch (8,9,10,11), User port power supply, Actual firmware, upgradeable via sd card, LEDs (Blue, Red) on Commodore logo, 4 buttons: User port reset, SD2IEC reset and disk change buttons, Atmega 1284p microcontroller.

The package includes: SD2IEC Drive & 60cm Data cable, User Guide on pdf format. 100% tested and working.



Take a look at the picture, these plug into the Commodore's User Port and sit neatly at the side of your 64.








Some extra pictures showing the controls and cable.