Skip to main content

Commodore 64 - The Final Cartridge III+, TFC III+ TFC 3+ Cartridge Cased with Label


The new TFC III+ Labels have just arrived and the cased version of the Final Cartridge III+ for the Commodore 64 is ready!

Our designer James has done a great job - again!

Now shipping - £25 plus £2.50 UK or £8 overseas postage.

Comments

  1. any one can explain to me wat this card does ,is it like a test card ??

    ReplyDelete
    Replies
    1. It is a utility pack for the 64, simple google and you can read all about it.

      Delete
  2. Hello, recently purchased one of these to use with my new setup (inc SD2IEC) and was wondering if there was any good documentation (for this or earlier revision) you could point me to? I'm an old Commodore 64 user but never had an utility carts back then, so it's all pretty new to me.

    ReplyDelete
    Replies
    1. Simply Google The Final Cartridge Manual and you will find it easily.

      Delete
  3. Hi, is it possible to load in the eprom of the FCIII other cartridges images, like the captain mk-III (it is the freeze cartridge I loved back in the 80's)?

    ReplyDelete
    Replies
    1. Our version has the eprom soldered to the PCB, but there are other great sellers who offer this as a service, and will program the eprom for you.

      Delete

Post a Comment

Popular posts from this blog

SD2IEC Now available at Shareware Plus for the Commodore 64

The SD2IEC market is flooded with budget, poor quality SD2IEC Interfaces, often just the pcb with no protection and those which are cased are clumsy and difficult to use on a day by day basis.

In partnership with the designers & manufacturers of the uCassette and Tapuino v2, we have now received our first delivery of SD2IEC Interfaces.

Features - Retro design, Attend SD card socket, Adjustable device number by dip switch (8,9,10,11), User port power supply, Actual firmware, upgradeable via sd card, LEDs (Blue, Red) on Commodore logo, 4 buttons: User port reset, SD2IEC reset and disk change buttons, Atmega 1284p microcontroller.

The package includes: SD2IEC Drive & 60cm Data cable, User Guide on pdf format. 100% tested and working.



Take a look at the picture, these plug into the Commodore's User Port and sit neatly at the side of your 64.








Some extra pictures showing the controls and cable.

Commodore 64 WiFi Modem now finished plus bonus BBS Cards!

We have been working overtime to get the WiFi Modems packaging finished and it looks fantastic!




The WiFi 64 is £34 plus postage. UK Postage is £2.50 and overseas £6.50, if you would like tracking then postage is £12.50, sorry we do not post to Hungary or Canada. Simple email sales@sharewareplus.com

Plus the new Top BBS Cards are finished to go with the modems!


We have about 40 spare packs, would you like a pack? Email us, pay £2 and the postage and we will get a pack on the way to you!

LumaFix 64 has arrived!

LumaFix64 has arrived


LumaFix was made to easily remove vertical lines from your C64 image caused by signals also in the VIC-II video chip. It also has an adjustment for the Chroma signal that can help reduce problems related mostly to s-video connection on modern TV:s, the dreaded chequered pattern. LumaFix64 helps getting rid of the problem by inverting the interfering signals and feeding it back into the Luma signal.

We will make up a couple of test units and send them over to the developer e5frog and as soon as we get the OK we will sell them!