Skip to main content

How to buy our Updated - Commodore 64 SID2SID 6581 & 8580 Parts SID Kit


Commodore 64 SID2SID 6581 & 8580 Parts Kit


This kit available from stock. Updated June 2018

Save time and money with the new boxed SID2SID kit, includes all the parts you need except the PCB & SID Chips.

Plus this kit has the parts for both the 6581 & 8580 SID Chips.


Parts Kit Includes -

1x 2N2222 TO-18
1x 10K Ohm Resistor (r9)
2x 1K Ohm Resistors (r8 r12)
1x 10uf Electrolytic Capacitor
1x 1000pf Capacitor (c74)
1x 470pf Capacitor (c76)

1x 28 Pin IC Socket
1x 28 Pin IC Socket Long Legs  


plus -
4x 470pf Capacitors for 6581 SID
4x 22000pf Capacitors for 8580 SID
1x 2N3904 for 8580R5 SID

1x 3.5mm Jack Socket
& 6.35MM Jack socket with suitable wire



For the Sid2SID PCB just go to - http://www.mssiah.com/features.php#sid2sid for the complete installation guide - http://www.mssiah.com/files/SID2SID_InstallationGuide.pdf


The SID2SID kit is only £16 with free worldwide shipping.


To order simply send via PayPal £16 (Extra Kits are £12 Each) with your Name & Address and we will dispatch your order to you, usually the same day.


Our email and PayPal email address is sales@sharewareplus.com

If you have any questions just ask. 

Comments

Popular posts from this blog

SD2IEC Now available at Shareware Plus for the Commodore 64

The SD2IEC market is flooded with budget, poor quality SD2IEC Interfaces, often just the pcb with no protection and those which are cased are clumsy and difficult to use on a day by day basis.

In partnership with the designers & manufacturers of the uCassette and Tapuino v2, we have now received our first delivery of SD2IEC Interfaces.

Features - Retro design, Attend SD card socket, Adjustable device number by dip switch (8,9,10,11), User port power supply, Actual firmware, upgradeable via sd card, LEDs (Blue, Red) on Commodore logo, 4 buttons: User port reset, SD2IEC reset and disk change buttons, Atmega 1284p microcontroller.

The package includes: SD2IEC Drive & 60cm Data cable, User Guide on pdf format. 100% tested and working.



Take a look at the picture, these plug into the Commodore's User Port and sit neatly at the side of your 64.








Some extra pictures showing the controls and cable.

Commodore 64 WiFi Modem now finished plus bonus BBS Cards!

We have been working overtime to get the WiFi Modems packaging finished and it looks fantastic!




The WiFi 64 is £34 plus postage. UK Postage is £2.50 and overseas £6.50, if you would like tracking then postage is £12.50, sorry we do not post to Hungary or Canada. Simple email sales@sharewareplus.com

Plus the new Top BBS Cards are finished to go with the modems!


We have about 40 spare packs, would you like a pack? Email us, pay £2 and the postage and we will get a pack on the way to you!

LumaFix 64 has arrived!

LumaFix64 has arrived


LumaFix was made to easily remove vertical lines from your C64 image caused by signals also in the VIC-II video chip. It also has an adjustment for the Chroma signal that can help reduce problems related mostly to s-video connection on modern TV:s, the dreaded chequered pattern. LumaFix64 helps getting rid of the problem by inverting the interfering signals and feeding it back into the Luma signal.

We will make up a couple of test units and send them over to the developer e5frog and as soon as we get the OK we will sell them!