Skip to main content

Commodore 64 WiFi Modem now finished plus bonus BBS Cards!

WiFi 64 For The Commodore 64


We have been working overtime to get the WiFi Modems packaging finished and it looks fantastic!

The WiFi 64 is £34 plus postage. Simple email sales@sharewareplus.com

Updated 1st May 2026



Comments

  1. Unknown5 March 2018 at 00:17

    Hi I need a wifi card with bbs cards and a lumafix .How much will the total be with tracked shipping to Malta?

    ReplyDelete
  2. Unknown24 April 2018 at 14:55

    I'd like to purchase one of these cards. How do I go about it?

    ReplyDelete
  3. Unknown24 April 2018 at 14:56

    I'd like to purchase one. How do I go about getting one from you?

    ReplyDelete
  4. Unknown27 April 2018 at 14:25

    Hi, where can I buy one of these?

    THanks!

    ReplyDelete
  5. exocytosis3 June 2018 at 21:18

    Are these compatible with CommodoreServer/Quantum Link/Habitat? That is, are they fully WiModem/Comet Modem compatible? (if they are, I'd much rather buy this seeing you are based in Europe)

    ReplyDelete
    Replies
    1. Tim Harris15 June 2018 at 19:22

      Tested with Habitat, not sure about the others.

      Delete
  6. acer6 June 2018 at 08:21

    Can this modem be used in C128 mode?

    ReplyDelete
  7. Wwwerds of Rich1 November 2018 at 19:36

    What are the benefits to this over the wimodem? I like the look of this one

    ReplyDelete
    Replies
    1. Tim Harris1 November 2018 at 21:50

      I watched a video on the wimodem and they are about the same, they have a display and we use a better modem.

      Delete
  8. vbguyny29 September 2019 at 01:34

    Hello, I have been using the WiFi64 with my Commodore 64 (breadbin) and it has been working pretty well up until yesterday. It seems that after using it for an hour I am no loner able to connect to any BBS (using atdt command returns "no answer") nor get anything from HTTP (using atget command returns "no carrier").

    I have tried performing factory resets on the adapter multiple times even switched with wireless router I was connecting to with no avail. Then went to sleep. This morning it was working again but after an hour or so it stopped.

    Is there a heat issue with the adapter? Has anyone else has this issue?

    ReplyDelete
    Replies
    1. Tim Harris30 September 2019 at 21:00

      Hi,

      This may be difficult to solve and it may be better to send it back for replacement.

      You may have a fault with the User Port.

      If you have factory reset then the baud rate needs to be set again, written and then the 64 switched off and the software reloaded. Often setting it and not restarting causes problems.

      There is no heat issue, i have never noticed them getting warm at all.

      It is possible the software has corrupted, try a new floppy disk with just the program on.

      I am not sure any of this will help, if you want to drop it back to me, i will replace it for you.

      Tim

      Delete
    2. vbguyny1 October 2019 at 01:09

      Hello, Tim! Thanks for the quick response! My brother has the same WiFi device so I am going to switch with him first and see if the same thing happens. I'll let you know!

      Delete
    3. vbguyny7 February 2021 at 22:45

      Btw the issue appears to be related to my WiFi modem with WPA2 enabled. When I disable it the modem works. I have an old Belkin router. Nothing to do for me because I figured out the workaround

      Delete
  9. Tommaso Miani14 December 2019 at 14:06

    Hello Tim!
    Thanks for your stunning modem.
    It worked well until today suddenly stopped working.
    My terminal program (ccgms ultimate) it's incapable to communicate with it.
    My user port seems ok and at the moment I do not have another machine to test it.
    How can I solve this problem?

    Thanks,
    Tommaso

    ReplyDelete
    Replies
    1. Tim Harris14 December 2019 at 17:35

      You need to send it back to me.

      Delete
    2. Yomama7 February 2021 at 00:23

      Can the wifi 64 also be used with commodore Sx64, the "portable version2 of the commodore 64?

      Delete
    3. Tim Harris7 February 2021 at 22:35

      I do not know for sure, but i think it will.

      Delete

Post a Comment

Popular posts from this blog

Pi1541 Commodore 1541 disk drive emulator C64

Update - 23rd May 2026 The kits are back in stock, I have one kit available. Please email sales@sharewareplus.com  Great reviews - https://www.breadbox64.com/blog/the-pi1541-disk-drive/ https://lyonsden.net/pi1541-disk-drive/ Kit version - There is a shortage of Raspberry Pi 3B+ so this is available as a kit, without the Pi. Assembly instructions are included and only a screw driver is required for assembly.  The kit includes the high quality case, custom Pi Hat, USB & power switch assembly, OLED display, short serial cable, mounting rails and fixings. It also includes the assembly & operating instructions. We will email you a link to download all the files you need to put on the Micro SD Card. You will need a Raspberry Pi 3B or a 3B+ (recommended) , a new low capacity Micro SD Card and a genuine 3 amp power supply. Assembled Version - Currently not available. This is one of the nicest Pi1541 we have seen. Pi1541 Commodore 1541 disk drive emulator C64 New Specifica...
17 comments
Read more

Commodore 64 Tape Pulse Visualizer By BWACK

  Commodore 64 Tape Pulse Visualizer By BWACK For use with the Azimuth Head Alignment Tape from Interceptor Software and compatible azimuth programs.  Features 60 LEDs displaying real-time short, medium & high length pulses powered by the Arduino Nano v3 micro controller. Here is a recent indepth review -  https://lyonsden.net/c64-tape-pulse-visualizer/ You can find the complete project by BWACK here - https://github.com/bwack/CommodoreTapePulseVisualizer Available from stock. £28 plus postage, to order please email sales@sharewareplus.com Updated May 2026
Post a Comment
Read more

New - WiC64 – The Wireless Interface for Commodore 64, 128, 128D & SX-64

  August 2025 to be discontinued, available while stocks last. The Wireless Interface for the Commodore 64. The WiC64 is a parallel WLAN interface for Commodore computers with user port connection. In contrast to the earlier modems, the WiC64 works in parallel mode with 8 data lines, 2 handshake lines and one control line. That speeds up data transmission by a factor of 20: speeds of up to 20,480 bytes/second, The WiC64 can load 202 blocks / 50kb in 2.5 seconds from the internet - via HTTP:// or TCP connection. Run Google Maps on your Commodore - It gives you full access to the internet on your Commodore, with all the possible applications you can imagine. From simple applications such as synchronising the time, loading data and programs from web servers or from PHP scripts to complex chat and messaging systems, Google Maps, online games and lots more.  Comprising a dedicated host board with reset, a pre programmed ESP32, and an LCD display with the device IP and connection st...
Post a Comment
Read more